Frequently Bought Together
About This Product
Fasson - Delivered on high tensile aluminum foil facestock with an antimicrobial acrylic adhesive, these UL 181 AP / B-FX registered tapes are used in HVAC mechanical installation to seal aluminum duct work and FSK board.
Use to seal joints and seams on fiberglass duct board and flexible duct in the HVAC market.
Features and Benefits:
Specially formulated antimicrobial acrylic adhesive High tensile strength aluminum foil facestock Meets SMACNA performance standard AFTS 101-73 UL 181 A-P /B-FX classified PSA complies with South Coast Air Quality Management District's (SCAQMD) Rule 1168 20-year Fasson limited product warranty Ultimate in product reliability Made in the USA
Weight 2 Pounds (lbs)
Width 2.5 Inches (In)
Height 6 Inches (In)
Country of Origin USA
Length 6 Inches (In)
Adhesion Strength 5.0 lbs/in
Application Seals joints and seams on fiberglass duct board and flexible duct
Application Temperature >50°F (10°C)
Approvals UL 181 A-P/B-FX LEED Point contibutor
Composition 2 mil Aluminum foil
Functions Joining and Sealing Fiberglass Ductboard and Class 1 Flexible Duct
Maximum Temperature 400°F (204.4°C)
Performance Temperature 350°F (176.6°C)
Prop 65 No
Roll Length 180'
Shelf Life One year when stored at 64-72ºF (18-22ºC) / 30-70% relative humidity, out of direct sunlight and in original packaging
Size 2.5" x 180'
Standards UL 181A-P and 181B-FX LEED® Point Contributor
Storage Temperature 64°F to 72°F (17.7°C to 22.2°C)
Tensile Strength 25 lbf/in minimum
Thickness 6.90 Mils
Type High Tensile Strength Aluminum Foil
Safety Data Sheet 1 - English
Specification Sheet - English
Equipment Part List
Back To Equipment Models