Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.

Ductless 24000 Btu 16 SEER High Wall Heat Pump Bundle (208/230-1-60)

Item: ST-MB6H243
  • Heat Pump
  • 208/230 Volt

Included In This Bundle

  • DiversiTech - UC1838-3 UltraLite® Lightweight Concrete Equipment Pad 18" x 38" x 3" - 18# Per Pad
    Item: EP-18X38X3-U
    MFR: UC1838-3
    Quantity: 1
  • TRADEPRO® - TP-60AMP-NF Non-Fusible Disconnect 60 amp
    Item: TP-60AMP-NF
    MFR: TP-60AMP-NF
    Quantity: 1
  • TRADEPRO® - TP-WHIP-1/2X6NM Non-Metallic Connector Whip 1/2" x 6'
    Item: TP-WHIP-1/2X6NM
    MFR: TP-WHIP-1/2X6NM
    Quantity: 1
  • JMF - 3/8" x 5/8" x 1/2" x 30' EZ-PULL® Ductless Hard Shell Insulation
    Item: LS-MS-3/8X5/8X1/2X30-EZ
    MFR: DL061008300HE14435
    Quantity: 1
  • Ductless 24000 Btu High Wall Indoor Unit Heat Pump 208/230-1-60
    Item: 40MHHQ24---3
    MFR: 40MHHQ24---3
    Quantity: 1
  • Ductless 24000 Btuh Heat Pump Single Zone w/ Basepan Heater 208/230-1
    Item: 38MHRBQ24AA3
    MFR: 38MHRBQ24AA3
    Quantity: 1

* Required Fields

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
What’s the price?
Sign in for pricing.

About This Product

Product Info

Description

Ductless 24000 Btu 16 SEER High Wall Heat Pump Bundle (208/230-1-60)
  • Condensing Unit
  • Fan Coil
  • Whip
  • Line Set
  • Pad
  • Disconnect
Items may differ from image!!

Specifications

BrandVaries

Bundle Components

DiversiTech - UC1838-3 UltraLite® Lightweight Concrete Equipment Pad 18" x 38" x 3" - 18# Per Pad

Item: EP-18X38X3-U

Description

Equipment Pads - UltraLite Series

A true concrete equipment pad at the weight of plastic (about 2.5 lbs. per square foot). UltraLite® is strengthened by miles of fiber in each square foot of fiber-cement coating. This fiber allows the pad to flex instead of cracking or breaking. The textured surface prevents the condensing unit or portable generator from sliding, and allows water drainage, while the engineered encapsulated polystyrene (EPS) core prevents warping and provides a solid bottom to resist settling. Unaffected by soil conditions, ultraviolet (UV), temperature extremes, and other weather conditions.

Specifications

Weight18 Pounds (lbs)
Width18 Inches (In)
Height3 Inches (In)
Country of OriginUSA
Length38 Inches (In)
ApplicationLightweight Concrete Equipment Pads
BrandDiversiTech
ColorGray
CompositionFiber-cement over encapsulated polystyrene
For Use WithCondensing Units
Prop 65No
Size18" x 38" x 3"
TierUltraLite
TypeLightweight Concrete Equipment Pad

TRADEPRO® - TP-60AMP-NF Non-Fusible Disconnect 60 amp

Item: TP-60AMP-NF

Description

Non Fused model designed with pull-out handle for easy replacement. The line, load, and ground terminals are aligned for ease of wiring. This product has a reversible door which opens to either the left or right. The side open door opens more than 180 degrees for maximum access and has a full dead front. This is rain tight and sleet resistant

Specifications

Weight2.5 Pounds (lbs)
Width5 Inches (In)
Height7.5 Inches (In)
Country of OriginCHN
Length2.5 Inches (In)
Amps60
BrandTRADEPRO®
ColorBlack
CSA ListingNo
Cycle/Hertz60 Hz
PhaseSingle
Prop 65No
TypeNon-Fusible
Voltage208-230 VAC

TRADEPRO® - TP-WHIP-1/2X6NM Non-Metallic Connector Whip 1/2" x 6'

Item: TP-WHIP-1/2X6NM

Description

Liquid-tight flexible conduit system - a labor saving convenience kit for A/C unit hookup. Also use for heat pumps, refrigeration, hot tubs, swimming pools and outdoor lighting. Three distinct wire colors for ease of hook-up. Includes one straight and one 90° metallic or non-metallic connector. 90° connector is removable for straight connections. (Second straight connector not included.)
  • U.L. and C.U.L Listed

Specifications

Weight1.8 Pounds (lbs)
Width11 Inches (In)
Height2 Inches (In)
Country of OriginUSA
Length16.75 Inches (In)
ApplicationLiquid tight flexible conduit system. A labor saving convenience kit for A/C unit hookup. Also use for heat pumps, refrigeration, hot tubs, swimming pools and outdoor lighting.
BrandTRADEPRO®
Fitting Size1/2"
Overall Length6'
Prop 65No
Size1/2" X 6'
TypeNon-Metallic
Wire Gauge10 AWG

JMF - 3/8" x 5/8" x 1/2" x 30' EZ-PULL® Ductless Hard Shell Insulation

Item: LS-MS-3/8X5/8X1/2X30-EZ

Description

JMF - EZ-PULL® white polyethylene hard shell insulation is a flexible, polyethylene closed cell insulation with a polyethylene hard shell outer jacket designed to prevent tearing. EZ-PULL® insulation is designed for insulating cooling and heating refrigerant lines and is marked every foot to assist with accurate refrigerant charge. The insulation is produced in compliance with specification ASTM E96-00.

Specifications

Weight19.75 Pounds (lbs)
Width33.5 Inches (In)
Height5.25 Inches (In)
Country of OriginVar
Length33.5 Inches (In)
ApprovalsCurrently no ASTM rating for insulated copper tubing (line sets)
BrandJMF
Coil Length30'
ColorWhite
CompositionCopper tube, EZ PULL Insulation 45' brass flare nuts, 14/4 EZ IN wire
Insulation Thickness Liquid LineNone
Insulation Thickness Suction Line1/2"
Liquid Line Size3/8"
Pipe Length30'
Prop 65Yes
Size3/8" x 5/8" x 1/2" x 30'
Suction Line Size5/8"

Ductless 24000 Btu High Wall Indoor Unit Heat Pump 208/230-1-60

Item: 40MHHQ24---3

Description

40MHHQ24---3
40 = FAN COIL UNIT
MH = MODEL
H = HIGH WALL / INDOOR FAN COIL TYPE
Q = HEAT PUMP / PRODUCT FAMILY
24 = 2 TON / NOMINAL CAPACITY
--- = Not Used
3 = 208-230-1-60 / VOLTAGE

The 40MHH series ductless systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires.
The fan coil is mounted on the wall, near the ceiling. This selection of fan coils permits creative solutions to design problems such as:
  • Add-ons to current space (an office or family room addition)
  • Special space requirements
  • When changes in the load cannot be handled by the existing system
  • When adding air conditioning to spaces that are heated by hydronic or electric heat and have no ductwork
  • Historical renovations or any application where preserving the look of the original structure is essential.
The ideal compliment to your ducted system when it is impractical or prohibitively expensive to use ductwork.
These compact indoor fan coil units take up very little space in the room and do not obstruct windows. The fan coils are attractively styled to blend with most room decors. Advanced system components incorporate innovative technology to provide reliable cooling performance at low sound levels.
LOW SOUND LEVELS
When noise is a concern, the ductless systems are the answer. The indoor units are whisper quiet. There are no compressors indoors, either in the conditioned space or directly over it, and there is none of the noise usually generated by air being forced through ductwork.
SECURE OPERATION
If security is an issue, outdoor and indoor units are connected only by refrigerant piping and wiring to prevent intruders from crawling through ductwork. In addition, since the outdoor units can be installed close to an outside wall, coils are protected from vandals and severe weather.
FAST INSTALLATION
This compact ductless system is simple to install. A mounting bracket is standard with the indoor units and only wire and piping need to be run between the indoor and outdoor units. These units are fast and easy to install ensuring minimal disruption to customers in the home or workplace. This makes the ductless systems the equipment of choice, especially in retrofit situations.
SIMPLE SERVICING AND MAINTENANCE
Removing the top panel on outdoor units provides immediate access to the control compartment, providing a service technician access to check unit operation. In addition, the draw-thru design of the outdoor section means that dirt accumulates on the outside surface of the coil. Coils can be cleaned quickly from the inside using a pressure hose and detergent.
On all indoor units, service and maintenance expense is reduced due to easy-to-use cleanable filters. In addition, these high wall systems have extensive self-diagnostics to assist in troubleshooting.
BUILT-IN RELIABILITY
Ductless system indoor and outdoor units are designed to provide years of trouble-free operation.
The high wall indoor units include protection against freeze-up and high evaporator temperatures on heat pumps.
The condensing units on heat pumps are protected by a three minute time delay before the compressor starts the over-current protection and the high temperature protection.
INDIVIDUAL ROOM COMFORT
Maximum comfort is provided because each space can be controlled individually based on usage pattern. The air sweep feature provided permits optimal room air mixing to eliminate hot and cold spots for occupant comfort. In addition, year-round comfort can be provided with heat pumps.
ECONOMICAL OPERATION
The ductless system design allows individual room heating or cooling when required. There is no need to run large supply-air fans or chilled water pumps to handle a few spaces with unique load patterns. In addition, because air is moved only in the space required, no energy is wasted while air moves through the ducts.
EASY-TO-USE CONTROLS
The high wall units have microprocessor-based controls to provide the ultimate in comfort and efficiency. The user friendly wireless remote control provides the interface between the user and the unit.
ACCESSORIES
Customizing these ductless systems to your application is easily accomplished.
Adding a condensate pump accessory to the high wall fan coil provides installation flexibility.
OPTIONAL WIRED CONTROLLER
AGENCY LISTINGS

All systems are listed with AHRI (Air Conditioning, Heating & Refrigeration Institute), and ETL.

Specifications

Weight40.12 Pounds (lbs)
Width43.83 Inches (In)
Height13.41 Inches (In)
Country of OriginCHN
Length9.22 Inches (In)
Blower Motor HP6/77 HP
Blower Motor RPM1100
Blower Motor Speeds4
Blower Motor TypeFixed Torque
BrandPayne,Bryant,Carrier
CertificationsAHRI Certified
ColorWhite
Cycle/Hertz60 Hz
Drain Connection Size.625"
Liquid Line Size3/8"
Minimum Circuit Amps0.45
PhaseSingle
Product Family40MHH
Prop 65Yes
Rated Current Amps0.45
RefrigerantR-410a
Suction Line Size5/8"
TierComfort,Legacy™
Tonnage2
Voltage208-230 VAC
Warranty OfferedYes

Ductless 24000 Btuh Heat Pump Single Zone w/ Basepan Heater 208/230-1

Item: 38MHRBQ24AA3

Description

Ductless 24000 Btuh Heat Pump Single Zone w/ Basepan Heater 208/230-1

Specifications

Weight136.69 Pounds (lbs)
Width33.27 Inches (In)
Height27.64 Inches (In)
Country of OriginCHN
Length14.29 Inches (In)
BrandCarrier,Payne,Bryant
Circuit Breaker - Max Amps25
ColorWhite
Cooling Capacity9400-25200
Cooling Rated Capacity Btu/h24000
Cycle/Hertz60 Hz
EER10.9
InverterYes
Liquid Line FittingBrass Fitting
Liquid Line Size3/8"
Maximum Fuse Size25
Minimum Circuit Amps18
Number of HVAC Zones1
PhaseSingle
Product Family38MHRB
Prop 65Yes
Rated Current Amps0.6
Rated Load Amps12
RefrigerantR-410a
SEER17
Suction Line FittingBrass Fitting
Suction Line Size5/8"
TierStandard
Tonnage2
Voltage208-230 VAC
Warranty OfferedYes

Equipment Part List

Loading...